BT Headphone

Instructions to pair bluetooth Headphone with your device.

Model No:  Thunder

Q: How to connect the headphone ?
A: Press the Power key to turn ON the headphone and it would go the Bluetooth mode by default.
   Scan for ZEB-THUNDER headphone on your mobile and connect it. (Password - 0000, if prompted)

Q: What are the different modes in the headphone ?
A: Wireless BT / FM / Micro SD / AUX

Q: How to tune FM channels?
A: Long press the Play/Pause button to Switch the headphones to FM mode.Short Press the Play/Pause button once to start scanning the FM channels.
   Once the scanning is complete, the headphone will start playing from first saved channel.
   To change the channels you can use next/previous buttons.

Q: What are the different LED indicators?
A: Red LED glowing - Charging.
   Red LED turns Blue - Full charge.
   Blue LED blinks  - BT Discover Mode.
   Blue LED glows constantly - Headphone is connected to a device

Q: How to increase/decrease the volume level of the headphone?
A: Press and hold the + / - button to increase / decrease the volume respectively.

Q: What is the operating range of the headphone in wireless mode?
A: 8-10 meters.

Q: What is the maximum capacity of mSD card that the headphone can support?
A: 32GB.

Q: Does the headphone have call function?
A: Yes.

Q: What is the charging voltage?
A: DC 5V with micro USB cable.


Model No:  Aura

Q: How to connect the headphone ?
A: While the headphone is off, Press and hold the ON/OFF key till the blue & red LED light starts blinking alternatively.
Scan for ZEB-AURA headphone on your mobile and connect. (Password - 0000, if prompted)
ZEB-AURA:

Q: What are the different modes of the headphone ?
A: Wireless & AUX mode.

Q: What are the different LED indicators ?
A: Red LED glowing - Charging.
   Red LED off - Full charge.
   Red Blue LED glows alternatively - Discover Mode.
   Blue LED blink once every 5 seconds - Headphone is connected to a device

Q: How to increase/decrease the volume level of the headphone ?
A: Press the V+ / V- button to increase/decrease the volume respectively.
   Note: Volume can be controlled in wireless mode only.

Q: Can you answer phone calls with this headphone ?
A: Yes, when the headphone is connected to the mobile phone in wireless mode.

Q: Can I make a call from the headphone when connected to a mobile phone ?
A: You can redial the last number dialed by double pressing the ON/OFF key on your headphone.

Q: How to use AUX mode in ZEB-AURA ?
A: Connect one end of a 3.5mm jack to the headphone. (Your ZEB-AURA will switch to AUX mode once you connect a 3.5mm jack to it)
     Now, connect the other end of the 3.5mm jack to a audio source.
 

Model No: Disc

Q: How to connect the headphone ?
A: Turn on the headphones using the ON / OFF switch and search for the device.
    Tap the name "DISC" on your phone and connect it. (Password - 0000, if prompted)

Q: What are the different modes in the headphone?
A: BT Wireless / Micro SD / FM Mode / AUX

Q: How to tune FM channels?
A: Switch the headphones to FM mode using the MODE button.
    Press the Play/Pause button once to scan the FM channels.
    Once the scanning is complete, the headphones will start playing from first scanned channel.
    To change the channels you can use next/previous buttons.

Q: What are the different LED indicators?
A: Red LED glowing - Charging  
    Red LED turns OFF - Fully charged
    Blue LED blinks in - Discover Mode.

Q: Can the LED lights of the headphone be turned OFF / ON?
A: Yes. The LEDs can be turned OFF / ON by long pressing the Play/Pause button.

Q: What is the operating range of the headphone in wireless mode?
A: 8-10 meters.

Q: How to increase/decrease the volume level?
A: Press and hold the "V+ / V-"  to increase/decrease the volume level respectively.

Q: What is the maximum capacity of SD card that headphone can support?
A: 32GB.

Q: Does the headphone have call function?
A: Yes.

Q: What is the charging voltage?
A: DC 5V with micro USB cable.


Model No: Neptune

Q: How to connect the headphone ?
A: While the headphone is off, Press and hold the ON/OFF key till the blue & red LED light starts blinking alternatively.
    Scan for "ZEB-NEPTUNE" on your mobile and connect. (Password - 0000, if prompted)


Q: What are the different modes of the headphone ?
A: Wireless & AUX mode.


Q: What are the different LED indicators?
A: Red LED glowing - Charging.
    Red LED off - Full charge.
    Red Blue LED glows alternatively - Discover Mode.
    Blue LED glowing - Headphone is connected to a device


Q: How to increase/decrease the volume level of the headphone?
A: Press and hold +/- to incresae/decrease the volume respectively.
    Note: Volume can be controlled in wireless mode only.
 

Q: Can you answer phone calls with this headphone?
A:  Yes, while the headphone is connected to the mobile phone via wireless.


Q: How to reject an incoming call?
A: During an incoming call, Press and hold the ON/OFF key for 3 secs.
     Note: This function works only in wireless mode.


Q: Can i make a call from the headphone when connected to a mobile phone ?
A: You can redial the last number dialed by double pressing the ON/OFF key on your headphone.

Q: How to use AUX mode in ZEB-NEPTUNE?
A: Connect one end of a 3.5mm jack to the headphone. (Your ZEB-NEPTUNE will switch to AUX mode once you connect a 3.5mm jack to it)
    Now, connect the other end of the 3.5mm jack to a audio source.


Q: Are the LED lights rythmic?
A: Yes.


Model No: Aura

Q: How to connect the headphone ?
A: While the headphone is off, Press and hold the ON/OFF key till the blue & red LED light starts blinking alternatively.
     Scan for ZEB-AURA headphone on your mobile and connect. (Password - 0000, if prompted)


Q: What are the different modes of the headphone ?
A: Wireless & AUX mode.


Q: What are the different LED indicators?
A: Red LED glowing - Charging.
   Red LED off - Full charge.
   Red Blue LED glows alternatively - Discover Mode.
   Blue LED blink once every 5 seconds - Headphone is connected to a device


Q: How to increase/decrease the volume level of the headphone?
A: Press and hold V+/V- to incresae/decrease the volume respectively.
   Note: Volume can be controlled in wireless mode only.


Q: Can you answer phone calls with this headphone?
A: Yes, while the headphone is connected to the mobile phone.


Q: How to reject an incoming call?
A: During an incoming call, Press and hold the ON/OFF key for 3 secs.
     Note: This function works only in wireless mode.


Q: Can i make a call from the headphone when connected to a mobile phone ?
A: You can redial the last number dialed by double pressing the ON/OFF key on your headphone.


Q: How to use AUX mode in ZEB-AURA?
A: Connect one end of a 3.5mm jack to the headphone. (Your ZEB-AURA will switch to AUX mode once you connect a 3.5mm jack to it)
     Now, connect the other end of the 3.5mm jack to a audio source.

 

Model No: Airwalk – 2

1. Turn ON the Device.
2. Change the mode to bluetooth
3. Voice notification will be coming and Blue LED will be blinking rapidly
4. Scan and discover the bluetooth Speaker on your device to pair and connect it.
5. Password - 0000 (if prompted)

LED Indicator
* Red LED glowing - Charging, after full charge goes off
FM Operation
1. Turn ON the device.
2. Press & Hold Play/Pause button for few seconds to change mode to FM.
3. Short Press Play/Pause button to scan the FM channels (Red color LED light will blink every second)
4. Press Next and Prev button to change the saved FM channels.

 

Model No:  Tarang

1. Turn ON the Device.
2. Change the mode to FM.
3. Voice notification will be coming and Blue LED will be blinking rapidly
4. Scan and discover the bluetooth Speaker on your device to pair and connect it.
5. Password - 0000 (if prompted)

LED Indicator
* Red LED glowing - Charging, after full charge goes off
FM Operation
1. Turn ON the device.
2. Press & Hold Play/Pause button for few seconds to change mode to FM.
3. Press & Hold Play/Pause button for few seconds to scan FM channels (Blue color LED light will blink every second)
4. Press Next and Prev button to change the saved FM channels.


Model No: Blue Air

1. Make sure the device is switched off.
2. Press and hold the call button till the blue LED light starts blinking rapidly.
3. Scan and discover the bluetooth headset on your device to pair and connect it.
4. Password - 0000(if prompted)

LED Indicator details
Red LED glowing - Charging, Blue LED glowing - charging complete


Model No: Air One

1. Make sure the device is switched off.
2. Press and hold the Power button till the blue & red LED light starts blinking simultaneously.
3. Scan and discover the bluetooth headset on your device to pair and connect it.
4. Password - 0000(if prompted)
* The LED indication will be available near to the 3.5mm Aux port

LED Indicator details
Red LED glowing - Charging, Blue LED glowing - charging complete
Red Blue LED glowing simultaneously – Search Mode, Blue LED blink once every 4 seconds – Power ON.
 

Model No: Raga

1. Make sure the device is switched off.
2. Press and hold the Power button till the blue LED light starts blinking rapidly.
3. Scan and discover the bluetooth headset on your device to pair and connect it.
4. Password - 0000(if prompted)

LED Indicator details
Red LED glowing - Charging. After full charge the LED will go off.
FM Operation
1. Turn ON the device.
2. Change the mode to FM.
3. Press & Hold Play/Pause button to scan the FM channels (Blue color LED light will blink every second)
4. Press Next and Prev button to change the saved FM channels.
 

Model No: Happy Head

1. Make sure the device is switched off.
2. Press and hold the Power button till the blue LED light starts blinking rapidly.
3. Scan and discover the bluetooth headset on your device to pair and connect it.
4. Password - 0000(if prompted)

LED Indicator details
Red LED glowing - Charging. After full charge the LED will go off.

 

Model No: Hiplife

1. Make sure the device is switched off.
2. Press and hold the POWER button till the blue & red LED light starts blinking simultaneously.
3. Scan and discover the bluetooth headset on your device to pair and connect it.
4. Password - 0000(if prompted)

LED Indicator details
Red LED glowing - Charging, After full charge the LED will go off