FAQ - Closic Mirror
Closic Mirror
FAQ
Q: How to connect a phone for wireless music ?
A: When the ZEB-CLOSIC MIRROR is in wireless mode, search for nearby BT devices in your device. Tap the name "ZEB-CLOSIC MIRROR" and connect it.
(Password - 0000, if prompted)
Q: What are the different modes in CLOSIC MIRROR speaker?
A: BT Wireless / Micro SD card / USB / FM / AUX / Clock mode.
Q: How to tune FM channels?
A: Switch the speaker to FM mode.Connect the antenna to the speaker.
Long Press the MODE button once to scan the FM channels.
Once the scanning is done, the speaker will start playing from first saved channel.
To change the channels you can use next/previous buttons.
Q: What are the different LED indicators?
A: Red LED glowing - ChargingRed LED turns OFF - Fully charged
Blue LED blinks rapidly – BT Discover Mode.
Blue LED stays constant - Speaker is connected to a device
Q: What is the operating range of the ZEB-CLOSIC MIRROR in wireless mode?
A: 8-10 meters.Q: How to decrease/increase the volume level?
A: Press and hold the - / + button to Decrease / Increase the volume level respectively.
Q: How to change the time?
A: When speaker is in OFF state, Press Power button to wake up the clock. Again press Power button to enter time edit mode.
Single press next/prev key to select either hours or mins. Use +/- key to change the time.
Press the Power key to save.
Q: How to set alarm time?
A: When speaker is in OFF state,Press Power button to wake up the clock. Again press Power button to enter time edit mode.Press the next button thrice to edit alarm.
Use the next/prev key to change between hours/mins.
Use +/- key to change the time.
Again, press the next/prev. button to ON/OFF the alarm.
Use +/- key to choose ON/OFF.
Once done, press the Power button to save.
Q: What is the charging voltage?
A: DC 5V with micro USB cable.Q: What is the maximum capacity of USB / mSD card that ZEB-CLOSIC MIRROR can support?
A: 32GB.