FAQ - Zeb Action

Zeb Action


Q: How to Power ON/OFF ZEB-ACTION?
A: Long press the "POWER" button to Power ON/OFF the speaker.
Q: What are the different modes in ZEB-ACTION speaker and how to change them?

A: Single press the mode("M") button to toggle between different modes as given below,
    BT Wireless / Micro SD / USB / FM Mode / AUX.

Q: How to connect ZEB-ACTION for a wireless music experience?
A: When ZEB-ACTION is in BT mode, search for nearby BT devices in your mobile. Tap the name "ZEB-ACTION" and connect to it.
    (Password - 0000, if prompted)
Q: How to use TWS mode with ZEB-ACTION?
A: TWS mode requires 2 nos. of ZEB-ACTION speakers. While the speakers are ON, long press the mode("M") button on either of the speakers, till you hear a tone indicating that the TWS mode is activated.
    Now the speakers will automatically get paired with each other. Scan for "ZEB-ACTION" on your device's BT menu and connect to it.
    The songs played hereafter, will be played on both the speakers in a stereo setup.
Q: Does ZEB-ACTION support call function and how to use it?
A: Yes, while your device is connected to the speaker through BT,
    Single press "POWER" button    - Answer an incoming call/Disconnect a call.
    Long press "POWER" button    - Reject an incoming call.
    Double press "POWER" button    - Re-dial previous number.
Q: What is the maximum storage size of the USB/microSD card supported by ZEB-ACTION?
A: 32GB.
Q: How to use Pendrive(USB)/microSD card?
A: Once the Pendrive(USB)/microSD card is inserted in the speaker, it automatically enters the USB/microSD mode.
Q: How to tune FM channels?
A: Switch the speaker to FM mode.
    Connect the micro USB cable to the micro USB port of the speaker and leave the other end free (this cable will act as the FM antenna).
    Long press the mode("M") button once to scan the FM channels.
    Once the scanning is done, the speaker will start playing from first scanned channel.
    To change the channels you can use +/- buttons.
Q: What are the different LED indicators?

A: Red LED glowing             - Charging.  
    Red LED turns OFF             - Fully charged.
    White LED blinks every second     - Discover Mode.
    White LED blinks slowly         - Active (Songs are played/speaker is used).
    White LED glowing            - Stand-by (Speaker is connected to a device, while no songs are played).

Q: How to control media in ZEB-ACTION?
A: Single press "POWER" button        - Play/Pause.
    Single press "+" button        - Next track.
    Single press "-" button        - Prev. track.
Q: How to control volume in ZEB-ACTION?
A: Long press "+" button    - Increase volume.
    Long press "-" button    - Decrease volume.
Q: What is the operating range of the ZEB-ACTION in wireless mode?
A: 8-10 meters.
Q: What is the charging voltage OF ZEB-ACTION?
A: DC 5V with micro USB cable.