FAQ: ZEB-BUDDY 100


Q: How to power ON the speaker?
A: Use the Power ON/OFF slider switch to switch ON/OFF the speaker
Q What are the modes available in the speaker?

A: Wireless BT, USB & Micro SD, Built-in FM Radio and AUX input

Q: How to switch between the modes?
A: Press the “M” button present in the speaker to switch between the modes
Q How to use Wireless BT mode?
A: Turn ON the speaker as it enters BT mode by default. Now, search for nearby BT devices in your mobile and Tap on the BT name “ZEB-BUDDY 100” to connect.
Q: How to use the USB/Micro SD mode?
A: Turn ON the speaker and Insert a USB Pen drive / Micro SD card to the respective port of the speaker. The speaker will automatically detect the songs from the Pen drive / Micro SD card and play songs. Kindly ensure that the songs are of MP3 format
Q:How to use the FM radio?
A: Turn ON the speaker and press the “M” button to switch to the FM mode
     Short press the “Play/Pause” key to auto scan the available FM channels
     Short press the “+” or “-” to change the scanned FM channels
     Use the charging cable as the Antenna for the better FM signal reception

Q: How to use the TWS Function?
A: Turn ON two ZEB-BUDDY 100 speakers you want to pair
     Long press the “M” button on any speaker to activate the TWS mode
     After few seconds, both the speakers will be connected successfully  Now, Search the nearby BT device in your mobile and Tap the name “ZEB-BUDDY 100” to connect
    First the TWS connections needs to be established then make the Bluetooth connection with the mobile phone
    To exit TWS mode, long press the “M” button again in any one of the speakers
Q: How to use AUX input mode?
A: Turn ON the speaker and press the “M” button to switch to the AUX mode
     Connect one end of the AUX cable to the speaker and other end to an Audio source
     The songs played from the audio source can be heard through the speaker

Q: How to control the RGB lights?

A:  When the speaker is turned ON, the RGB lights will be turned ON automatically
     Use the  “” switch to change the light modes

Q: How to increase /decrease the volume level?
A: Press and hold "-/+" to decrease/increase the volume level respectively
Q: What is the operating range of the ZEB-BUDDY 100 in BT mode?
A: 8 –10 meters (Without obstacles)
Q: What is the maximum capacity of USB / Micro SD card that ZEB-BUDDY 100 can support?
A: 32GB
Q: How to charge the speaker?
A: You can use 5VDC adapter and a micro USB cable to charge the speaker
Q How to charge the speaker?
A: Red LED glowing: Charging in process
     LED light goes OFF: Full charge
Q: How to use the wired microphone?
A: Connect the Microphone with cable provided inside the package, one side to the speaker rear panel (6.3mm connector) and the other end to the microphone.