FAQ - ZEB DT100

ZEB DT100

FAQ

Q: How to power ON/OFF ZEB-DT100?
A: Press the scan button to power ON the thermometer.
   The Thermometer will turn off when left unused for 16 seconds
Q: What type of battery can be used?
A: A pair of 1.5V AAA batteries can be used.
Q: How to scan for temperature using ZEB-DT100?
A: Press the scan button for once for scanning temperature
Q: What is the recommended distance/gap  while scanning temperature?
A: An average distance/gap of 1.5cm to 5cm is advised for better results.
Q: How to change the temperature scale / measurement unit from °C to °F or vice-versa?
A: Follow the below steps:
Step 1: While the device is in standby, press and hold the scan button for 8 seconds.
Step 2: Now press the scan button once and change the measurement unit from °F to °C or vice-versa.
Step 3: After changing the unit, leave the button untouched for the thermometer to turn off.
Q: How to check previous measurement readings?
A: ZEB-DT100 supports storage upto 50 measurement readings. To access the readings:
Step 1: While the device is in standby, press and hold the scan button for 4 seconds.
Step 2: Now press the scan button each time and check previous readings.
Step 3: Leave the button untouched for the thermometer to turn off & exit.
Q: How to check battery low indication?
A: The thermometer will display an empty battery icon for low battery.