FAQ - ZEB JUKE BAR 6000 DWS PRO


Q: How to access the various modes of the ZEB - JUKE BAR 6000 / 6001 DWS PRO soundbar?
A: The INPUT button, provided on the remote or on the soundbar can be used to change the mode of connectivity.
Q: How to connect the soundbar's HDMI ARC with the TV?
A: Kindly make sure that the TV which is used, supports HDMI ARC for audio.
Connect an HDMI ARC supported cable (version 1.4 or above with a minimum data transfer rate of 10.2Gbps) to the HDMI ARC port of the TV and the other end to the HDMI ARC port of the soundbar.
Enter the HDMI(ARC) input mode using the input button.
Enable the External Audio or Speaker settings of your TV (only if required).
Q: How to connect with ZEB - JUKE BAR 6000 / 6001 PRO DOLBY for wireless music?
A: Power ON the soundbar and enter the BT mode using the input button.
Scan for nearby BT on your device's BT menu and tap the name 'ZEB - JUKE BAR 6000 / 6001 DWS PROโ€ to connect.
Q: How to use OPTICAL input to connect with TV?
A: Kindly make sure that the TV which is used, supports OPTICAL output for audio.
Connect an OPTICAL cable to the OPTICAL output port of the TV and the other end to the OPTICAL input of the soundbar.
Enter the OPTICAL input mode using the input button.
Enable the External Audio or Speaker settings of your TV (only if required).
Q5: How to use AUX input to connect with TV?
A: Kindly make sure that your TV supports audio output (via RCA or headphone output port)* to use AUX input mode.

*If your TV supports RCA stereo audio output, use a RCA stereo to 3.5mm AUX cable to connect it with the soundbar. Please refer image below:

 3.5mm AUX cable
*If your TV supports 3.5mm AUX audio output, use a 3.5mm AUX to 3.5mm AUX audio cable accordingly. Please refer image below:
Audio cable
Enable the External Audio or Speaker settings of your TV (only if required).
Q: How to pair the wireless subwoofer with the soundbar of ZEB-JUKE BAR 6000 DWS PRO?
A: .As soon as the subwoofer and the soundbar are powered ON individually, they get paired with each other automatically.
To manually verify the pairing procedure, kindly follow the LED indication visible on the rear panel of the wireless subwoofer. LED indication are as follows:
*Blue LED blinking - Pairing mode (Wireless subwoofer is ready to pair)
*Blue LED glows constantly - Paired mode (Wireless subwoofer is connected with soundbar)
*Red LED glows - Soundbar is disconnected from wireless subwoofer.
Manual RESET (to be done only if the soundbar and subwoofer are not getting connected automatically) and pairing procedure are as follows:
*Press and hold the RESET switch (using a pin) / button behind the subwoofer.
*The LED indication will turn to blue blinking LED, faster than usual (Pairing mode).
*Now restart the soundbar individually and the pairing would initiate automatically.
Q: Is it necessary to adjust settings in the TV to get the best experience out of the soundbar?
A: Yes, after connecting the HDMI ARC and the OPTICAL port, kindly make sure that the TVโ€™s audio settings / speaker settings are adjusted accordingly to get the best audio experience. Kindly approach the TV manufacturer for knowing the settings or procedure.
Q: How to adjust the soundbarโ€™s audio output with the remote?
A: Please use the TREB +/- and BASS +/- options in the remote to adjust the Treble and Bass frequencies respectively.
Try adjusting the levels as per your requirement.
The remote also provides preset equaliser options such as MUSIC / NEWS / MOVIE / 3D modes additionally.