FAQ - ZEB-JUKE BAR 6100
Q: How to switch modes on the sound bar?
A: Use the Input button on remote to toggle between BT, USB, AUX, HDMI, or Optical modes.Q: How to connect the sound bar to TV using HDMI ARC?
A: Connect the HDMI ARC cable (version 1.4 or above) to the HDMI port on the sound bar and the ARC/EARC port on TV. Switch the sound bar to HDMI mode and enable HDMI CEC (Consumer Electronic Control) settings on TV. Note: HDMI-CEC settings may vary depending on TV model. Kindly approach the TV manufacturer for further assistance on the same.
Q: How to connect the sound bar to TV using an Optical cable?
A: Connect the sound bar to TV using an optical cable and switch the sound bar to Optical mode.Q: How to play music via the USB port?
A: Insert a FAT32 formatted USB flash drive (up to 32GB) containing only Mp3 files into the USB port of the sound bar. The sound bar will automatically detect and play the songs.Q: How to use the Aux input on the sound bar?
A: Connect PC, tablet, smartphone, or TV’s headphone socket to the AUX socket on the sound bar using a 3.5mm to 3.5mm audio cable. Alternatively, use a RCA to 3.5mm audio cable to connect TV’s audio output sockets to the AUX socket on the sound bar. Then, switch the sound bar to AUX mode and play audio from chosen source.Q: How to connect the sound bar via Bluetooth?
A: Turn on the sound bar, press the input button to switch to BT mode, and search for “ZEB-JUKE BAR 6100” on phone. Once connected, the BT indicator on the display will stop flickering.Q: What to do if sub-woofer is not paired with sound bar ?
A: Any Wifi device nearer to sub-woofer should be made OFF. Long press the button provided at the sub-woofer for 5 seconds. Then turn ON the sound bar then blue light on sub-woofer will become stable.Q: How to adjust the sound bar’s audio output with the remote?
A:Use the Movie, Music, News and 3D buttons on the remote to toggle between equalizer modes. To customize the Treble and Bass volume use TREB+/- and BASS+/- buttons.
Q: How to customize the RGB lights on the sound bar ?
A: Short press:
Switch the LED light effect. MODE 1: Constant lighting--red/green/blue/white/yellow/purple/pink/orange,7 colors auto-loop (each color for 2 secs)
MODE 2: Breathing light mode-- red/green/blue/white/yellow/purple/pink/orange, colors breathing mode auto-loop
MODE 3: Colorful running mode/Red/Green/Blue/White/Yellow/Purple/Pink/Orange, Colorful running mode auto-loop
MODE 4: Monochromatic waves mode/L red & R green /L green & R blue/L white & R purple/pink & R orange/L yellow & R pink/L purple & R white.
MODE 5: Rippling mode/Red/Green/Blue/White/Yellow/Purple/Pink/Orange, kinds rippling auto-loop
MODE 6: Colorful fluctuation
MODE 7: Colorful rippling
MODE 8: Colorful rolling mode frequency flashing lamp(flashing with music frequency)
MODE 9: Colorful flashing from middle to sides
MODE 10: Colorful flashing from sides to middle
Long press:
On-off LED light effect.Lighting Adjustment:
Press down 50%, Press down 20%, Press down 10%.