FAQ - ZEB-JUKE BAR 8700


Q: How to switch modes on the sound bar?
A. Use the Input button on remote to toggle between BT, AUX, HDMI.
Q: How to connect the sound bar to TV using HDMI ARC?
A: Connect the HDMI ARC cable (version 1.4 or above) to the HDMI port on the sound bar and the ARC/EARC port on TV. Switch the sound bar to HDMI mode and enable HDMI CEC (Consumer Electronic Control) settings on TV.
Note: HDMI-CEC settings may vary depending on TV model. Kindly approach the TV manufacturer for further assistance on the same.
Q: How to use the Aux input on the sound bar?
A: Connect PC, tablet, smartphone, or TV’s headphone socket to the AUX socket on the sound bar using a 3.5mm to 3.5mm audio cable. Alternatively, use a RCA to 3.5mm audio cable to connect TV’s audio output sockets to the AUX socket on the sound bar. Then, switch the sound bar to AUX mode and play audio from chosen source.
Q:  How to connect the sound bar via Bluetooth?
A: Turn on the sound bar, press the input button to switch to BT mode, and search for “ZEB-JUKE BAR 8700” on phone. Once connected, the BT indicator on the display will stop flickering.
Q: How to connect the sub-woofer with sound bar ?
A: Connect the adapter of the sub-woofer to the main power supply then it will automatically get connected with the sound bar through Bluetooth. If the blue LED light on the sub-woofer is stable, then it is paired up with sound bar. If it is blinking then it is not paired.
Q:  What to if sub-woofer is not paired with sound bar ?
A: .Any Wifi device nearer to sub-woofer should be made OFF. Long press the button provided at the bottom of the sub-woofer for 5 seconds. Then ON the sound bar then blue light on sub-woofer will become stable.
Q:What to if sub-woofer is not paired with sound bar ?
A: Any Wifi device nearer to sub-woofer should be made OFF. Long press the button provided at the bottom of the sub-woofer for 5 seconds. Then ON the sound bar then blue light on sub-woofer will become stable.
Q:  How to adjust the sound bar’s audio output with the remote?
A:Use the Movie, Music, News and 3D buttons on the remote to toggle between equalizer modes. To customize the Treble and Bass volume use TREB+/- and BASS+/- buttons. 
Q: How to play music via the USB port?
A: The USB port is only for software upgrade- service purpose only.
 .