FAQ - ZEB-JUKE BAR 9550


Q: How to switch modes on the sound bar?
A. Use the Input button on remote to toggle between BT, USB, AUX, HDMI, or Optical modes
Q: How to connect the sound bar to TV using HDMI ARC?
A: Connect the HDMI ARC cable (version 1.4 or above) to the HDMI port on the sound bar and the ARC/EARC port on TV. Switch the sound bar to HDMI mode and enable HDMI CEC (Consumer Electronic Control) settings on TV.
Note: HDMI-CEC settings may vary depending on TV model. Kindly approach the TV manufacturer for further assistance on the same.
Q: How to connect the sound bar to TV using an Optical cable?
A: .Connect the sound bar to TV using an optical cable and switch the sound bar to Optical mode.
Q:  How to play music via the USB port?
A: .Insert a FAT32 formatted USB flash drive (up to 32GB) containing only Mp3 files into the USB port of the sound bar. The sound bar will automatically detect and play the songs.
Q: How to use the AUX input on the sound bar?
A: Connect PC, tablet, smartphone, or TV’s headphone socket to the AUX socket on the sound bar using a 3.5mm to 3.5mm audio cable. Alternatively, use a RCA to 3.5mm audio cable to connect TV’s audio output sockets to the AUX socket on the sound bar. Then, switch the sound bar to AUX mode and play audio from chosen source.
Q:  How to connect the sound bar via Bluetooth?
A: Turn on the sound bar, press the input button to switch to BT mode, and search for “ZEB-JUKE BAR 9550” on phone. Once connected, the BT indicator on the display will stop flickering.
Q: How to connect the sub-woofer/ satellite speakers with sound bar ?
A: .Interconnect the sub-woofers/ satellite speakers with the cable provided on the active sub-woofer/ satellite speaker then connect the adapter of the active sub-woofer/ satellite speaker to the main power supply.
Q: How to know if the sub-woofer/ satellite speakers are paired with sound bar ?
A: .If the blue LED light on the active sub-woofer/ satellite speaker is stable, then it is paired up with sound bar. If it is blinking then it is not paired.
Q:  What to if sub-woofers/ satellite speakers are not paired with sound bar ?
A: Any Wifi device nearer to sub-woofers/satellite speakers should be made OFF. Long press the button provided at the active sub-woofer/ satellite speakers for 5 seconds. Turn ON the sound bar then blue light on sub-woofer/ satellite speakers will become stable.
Q: How to change the channel position of the satellite speakers ?
A: Short press the button at the bottom of the active satellite speaker to change the channel position of the satellite speakers(S Right <--> S Left).
Q:  How to customize the RGB light ?
A: Short press the light effect mode button to switch the light effectiveness.
  Short press this button to adjust the light brightness.
Q: How to adjust the sound bar’s audio output with the remote?
A:  Use the Movie, Music, News, and Sports mode buttons to toggle between equalizers. Use the TR+/- buttons, SW+/- buttons, CEN+/- buttons, SURR+/- buttons to customize the volume of Treble, Sub-woofer, center speaker and surround speakers respectively.