FAQ - Zeb-Juke bar 9750 Pro Dolby Atmos


Q: How do I switch modes on the sound bar?
A: Use the Input button on your remote to toggle between BT, USB, AUX, HDMI, or Optical modes.
Q: How do I connect the sound bar to my TV using HDMI ARC?
A: Connect the HDMI ARC cable (version 1.4 or above) to the HDMI port on the sound bar and the ARC/EARC port on your TV. Switch the sound bar to HDMI mode and enable HDMI CEC (Consumer Electronic Control) settings on your TV.
Note: HDMI-CEC settings may vary depending on your TV model. Kindly approach the TV manufacturer for further assistance on the same.
Q: How do I connect the sound bar to my TV using an Optical cable?
A: Connect the sound bar to your TV using an optical cable and switch the sound bar to Optical mode.
Q: How do I play music via the USB port?
A: Insert a FAT32 formatted USB flash drive (up to 32GB) containing only Mp3 files into the USB port of the sound bar. The sound bar will automatically detect and play the songs.
Q: How do I use the Aux input on the sound bar?
A: Connect your PC, tablet, smartphone, or TV’s headphone socket to the AUX socket on the sound bar using a 3.5mm to 3.5mm audio cable. Alternatively, use a RCA to 3.5mm audio cable to connect your TV’s audio output sockets to the AUX socket on the sound bar. Then, switch the sound bar to AUX mode and play audio from your chosen source.
Q:  How do I connect the sound bar via Bluetooth?
A: Turn on the sound bar, press the input button to switch to BT mode, and search for “ZEB-JUKE BAR 9750” on your phone. Once connected, the BT indicator on the display will stop flickering.
Q: How do I connect the satellite speakers to the sound bar?
A: Connect the satellite speakers using the provided cable on the active satellite speaker, then connect the adapter of the active satellite speaker to the main power supply.
Q:  How can I tell if the satellite speakers are paired with the sound bar?
A: If the blue LED light on the active satellite speaker is steady, it is paired with the sound bar. If it is blinking, it is not paired.

Q: How do I reset the satellite speakers with the sound bar?
A:  Turn off any Wi-Fi device near the rear speaker. Long press the button at the bottom of the active rear speaker for 5 seconds until it starts blinking rapidly. Then, turn on the sound bar. The blue light on the satellite speaker will become steady.
Q:  How do I adjust the sound bar’s audio output with the remote? 
A: Use the EQ button on the remote to toggle between Movie, Music, News, and Sports modes. The setting button at the bottom of the remote allows you to change the volume of the bass (b), treble (tr), center(c) speaker, and surround speaker (s). Simply select the desired option and customize it to your preference.
Q: How do I know if the speaker is playing DOLBY ATMOS?
A:  The ZEB-JUKE BAR 9750 will display “DOLBY ATMOS/DOLBY AUDIO” at the beginning when playing a DOLBY audio file.