FAQ - ZEB-JUKE BAR 9800 DWS PRO
Q: How to connect the sound bar's HDMI ARC with the TV?
A: Kindly make sure that the TV which is used supports HDMI ARC for audio.Connect an HDMI ARC supported cable (version 1.4 or above with a minimum data transfer rate of 10.2Gbps) to the HDMI ARC port of the TV and the other end to the HDMI ARC port of the sound bar.
Enter the HDMI (ARC) input mode using the input button.
Note: HDMI-CEC settings may vary depending on your TV model. Kindly approach the TV manufacturer for further assistance on the same.
Q: What are the input options for the sound bar?
A: The ZEB-JUKE BAR 9800 supports various input sources, including Bluetooth, USB, AUX, Optical, and HDMI (ARC, HDMI 1, and HDMI 2). Use the INPUT button on the remote to switch between these modes.Q: How to reset the Wireless Subwoofer?
A: Manual RESET (to be done only if the sound bar and subwoofer are not getting connected automatically) and pairing procedure are as follows:*Press and hold the WPS switch (using a pin) / button behind the subwoofer.
*The LED indication will turn to blue blinking LED, faster than usual (Pairing mode).
*Now restart the sound bar individually and the pairing would initiate automatically.
Q: What audio modes are available on the sound bar?
A: The sound bar offers various EQ (Equalizer) pre-sets, including Music, Movie, News, and 3D modes. You can switch between these modes using the EQ button on the remote control.
Q: How do I play audio via USB on the ZEB-JUKE BAR 9800?
A: Connect a USB flash drive containing MP3 audio files to the USB port on the sound bar. The sound bar will automatically switch to USB mode, and you can control playback using the remote control.
Q: How to connect with ZEB - JUKE BAR 9800 PRO DOLBY for wireless music?
A: Power ON the sound bar and enter the BT mode using the input button.Scan for nearby BT on your mobile device’s BT menu and tap the name 'ZEB - JUKE BAR 9800 DWS PRO” to connect.
Q: How to use OPTICAL input to connect with TV?
A: Kindly make sure that the TV which is used supports OPTICAL output for audio.Connect an OPTICAL cable to the OPTICAL output port of the TV and the other end of the cable to the OPTICAL input of the sound bar.
Enter the OPTICAL input mode using the input button.
Q: How to use AUX input to connect with TV?
A: Kindly make sure that your TV supports audio output (via RCA or headphone output port) to use AUX input mode.If your TV supports RCA stereo audio output, use a RCA stereo to 3.5mm AUX cable to connect it with the sound bar. Please refer image below:
If your TV supports 3.5mm AUX audio output, use a 3.5mm AUX to 3.5mm AUX audio cable accordingly. Please refer image below:
Enable the External Audio or Speaker settings of your TV (only if required).
Q: How to adjust the sound bar’s audio output with the remote?
A: Please use the TREB +/- and BASS +/- options in the remote to adjust the Treble and Bass frequencies respectively.Try adjusting the levels as per your requirement.
The remote also provides pre-set equaliser options such as MUSIC / NEWS / MOVIE / 3D modes additionally.