FAQ - ZEB-PARTY FYRE 100

Q: What audio input modes are available on the ZEB PARTY FYRE 100?
A: The available playback modes are Bluetooth (BT v5.3), USB, AUX, and FM radio.
Q:   How to control or turn off the LED lights on the ZEB PARTY FYRE 100?
A: Short-press the RGB LED button to cycle through the different lighting modes. Continuing to press the button past the final configuration will turn the LED indicators off completely.
Q:   How to adjust the microphone echo on the ZEB PARTY FYRE 100?
A: Long-press the M (Mode) button until you hear an audible beep, indicating that the speaker has entered microphone echo adjustment mode.
Q:   How to turn the Bass Boost mode on or off on the ZEB PARTY FYRE 100?
A: Short-press the dedicated BASS button on the control panel to toggle the bass mode on or off. 
Q:   How to use USB and AUX modes on the ZEB PARTY FYRE 100?
A: To use USB mode, insert a compatible USB flash drive (up to 32GB) containing MP3 files into the slot. The speaker will automatically detect and play the audio. For AUX mode, connect your audio source using a 3.5mm AUX cable. If the speaker does not automatically switch inputs, press the Mode button to cycle to your target selection manually. 
Q:   Where is the charging indicator located on the ZEB PARTY FYRE 100?
A: The LED charging indicator is located on the top control panel directly above the power button. A solid RED light indicates charging, and the light turns off once the device is fully charged.
Q:   How to set up and use the FM radio on the ZEB PARTY FYRE 100?
A: Short-press the M (Mode) button until the speaker enters FM mode. To scan for channels, connect a Type-C cable to the charging port to serve as an antenna , then short-press the Play/Pause button and wait a few seconds for the scan to complete. After scanning, navigate between saved channels using the Previous and Next buttons.
Q:     How to pair two ZEB PARTY FYRE 100 speakers together using TWS?
A: Power on both speakers and switch them to Bluetooth (wireless) mode. Press and hold the BASS button on either speaker for 2 seconds to initiate TWS pairing. Once paired successfully after a few seconds, locate and select "ZEB-PARTY FYRE 100" from your mobile device's Bluetooth menu to connect. To exit TWS mode, press and hold the BASS button again for 2 seconds.