FAQ - ZEB-PIXAPLAY 59

Q: What are the ports available for ZEB-PIXAPLAY 59?
A: The ports available in HDMI x1,HDMI x1(ARC) TYPE-C(DP),RJ45,USB x 2 ,AUX OUT
Q:   What is the resolution for ZEB-PIXAPLAY 59?
A:  The native resolution is 1920 x 1080 FHD and the max resolution is 1080P(Max).
Q:  What are the file formats supported in ZEB-PIXAPLAY 59?
A:  The supported file formats are AVI, MP4, MKV, FLV, MOV, MPG, TS
Q:  Does the ZEB-PIXAPLAY 59 projector have Wi-Fi and Bluetooth support?
A: Yes, projector supports dual-band Wi-Fi (2.4GHz & 5GHz) and Bluetooth version 5.0.
Q:   Can the ZEB-PIXAPLAY 59 projector be connected to external speakers?
A:  Yes you can connect external speakers in Aux and in HDMI(ARC) mode. For ARC, ARC   
 should be ON in your projector which can be found in your setting to other setting. 
Q:   What is the screen size range supported by the ZEB-PIXAPLAY 59 projector?
A:  The screen size supported range is from 152.4 - 508cm.
Q:    What is the maximum supported pen drive storage
A:  The maximum supported pen drive storage for ZEB-PIXAPLAY 59 is 32GB, and it should be in FAT32 format.
Q:  How to use ethernet in PIXA PLAY  59?
A: Go to Home page from there to Setup to Network to Wired setting to Ethernet Setting to Auto IP(ON). Insert the wired cable into LAN interface of the projector to use the wired network. It supports up to 100 Mbps Ethernet Port.
Q:    How to use Bluetooth remote control in ZEB-PIXAPLAY 59?
A:   To use Bluetooth in remote in to go setup Bluetooth setting Bluetooth(ON) scan for device. Place the remote control close to the projector press and hold the Left and Right on the remote control until the indicator light flashes quickly and shown up “BT remote control” and choose “BT -Remote Control ” enter OK button.
Q:    How to use type C DP port in ZEB-PIXAPLAY 59?
A:  To use in Type-C(DP) you should connect the cable to the projector and need to change the input mode to Type C.
Note: The device which you are connecting should support Type-C display out.