A: Insert the USB Drive into the USB port. The speaker will detect the USB Drive and the audio file will be played automatically.
Q: How to use the AUX input?
A: Connect one end of a 3.5mm cable to the speaker and connect the other end of the cable to an audio source. The tracks from the audio source can be heard through the speaker.
Q: How to connect via Bluetooth?
A: Switch the speaker to BT mode. 5 Scan for nearby BT devices on your mobile device. Tap on "ZEB-PRIMA PRO" to connect.
Q: How to activate the TWS (True Wireless Stereo) function?
A: Turn on two ZEB-PRIMA PRO speakers. Double click the "Bluetooth button" on any one speaker to activate TWS mode. After a few seconds, both speakers will be connected successfully. Search for "ZEB-PRIMA PRO" on your mobile to connect. Note: You need to make the TWS connection first, then make the Bluetooth connection with the mobile phone.
Q: How to use the Auracast Technology?
A: Connect your first speaker via Bluetooth. Short-press the Auracast button to enable broadcast mode; this speaker will act as the master unit. The master speaker will automatically search for and connect to other Auracast-enabled Zebronics speakers, which will function as slave units.
Q: How to reset the speaker?
A: Use the Anti-freeze reset button located near the speaker's ports. Alternatively, press and hold the BT button and the Bass Enhancement button simultaneously for 4 seconds to restore the factory settings.
Q: How to control the RGB lights?
A: Short press the RGB Light Button in the MIC Volume Knob to switch between the RGB Lighting modes. Long Press the button to toggle ON/OFF the RGB Modes. You can also control lighting through the ZEB VIBE CONTROL App.
Q: How to switch between Microphone and Guitar input?
A: In the MIC/GT Interface, pull the switch up to enable MIC. Push the switch down to enable Guitar Input.
Q: How to check the battery level?
A: Observe the Battery Level Indicator LEDs. There are five LEDs, each representing 20%, 40%, 60%, 80%, and 100% of the battery level.
