FAQ - ZEB SOUND FEAST 450

Q: What audio input modes are available on the ZEB SOUND FEAST 450?
A: The available playback modes are Bluetooth (BT v5.3), USB, and AUX

Q: How to connect and use USB and AUX modes on the ZEB SOUND FEAST 450?
A: For AUX mode, plug a 3.5mm AUX cable directly into the input port on the back of the speaker. For USB mode, connect a compatible USB flash drive (up to 32GB, formatted to FAT32) containing supported MP3, WAV, or FLAC files into the rear USB port. The speaker typically detects connected media automatically ; if it does not, short-press the M (Mode) button to cycle to your target input manually. 

Q: Can I connect a microphone to the ZEB SOUND FEAST 450?
A: Yes, you can connect a wired microphone by plugging a standard 6.3mm microphone jack into the dedicated MIC input port located on the back panel of the speaker.

Q: How to adjust the microphone echo level on the ZEB SOUND FEAST 450?
A: To adjust the echo level, first double-press the M (Mode) button to enter the microphone echo adjustment mode. Once inside this mode, press the + or - buttons to increase or decrease the echo depth. 
Q: How to pair two ZEB SOUND FEAST 450 speakers using the TWS function?
A:  Turn on two identical ZEB SOUND FEAST 450 speakers and ensure both are in Bluetooth mode. Long-press the Play/Pause (▷) button on one of the speakers to initiate TWS mode. The speakers will automatically search for and connect to each other. Once successfully paired, locate and select "ZEB-SoundFeast 450" on your mobile device's Bluetooth menu to stream synchronized audio.

Q: How to hardware reset the ZEB SOUND FEAST 450?
A: To perform a hardware reset on the device, locate the physical RESET pinhole positioned on the rear interface panel next to the AUX port and gently press inside it. (Note: The raw draft suggestion to long-press the non-existent "MENU" button is incorrect; the physical hardware pinhole must be used). 

Q: How to control, change, or turn off the RGB LED lights on the ZEB SOUND FEAST 450?
A: While a short press on the BASS button triggers the bass boost effect , a long press on the BASS button allows you to cycle through the different RGB LED illumination configurations or turn the lights off entirely.

Q: How can I check the remaining battery capacity on the ZEB SOUND FEAST 450?
A: The top control panel features 4 status indicator lights that display real-time capacity:
4 Lights Solid ON: 100% Battery.
3 Lights Solid ON: 75% Battery.
2 Lights Solid ON: 50% Battery.
1 Light Flashing: Below 25% Battery (device requires charging).