FAQ - Zeb Thump


Q: How to connect a phone for wireless music ?
A: When the speaker is in BT mode, search for nearby BT devices in your phone. Tap the BT name "ZEB-THUMP" and connect it. (Password - 0000, if prompted)
Q: What are the different modes in the speaker?
A: BT Wireless / SD card / USB / FM Mode / AUX.
Q: How to tune FM channels?
A: Switch the speaker to FM mode.
    Press the Play / Pause button once to scan the FM channels.
    Once the scanning is done, the speaker will start playing from first saved channel.
    Adjust the FM antenna appropriately for better signal reception.
    To change the channels, use the NEXT / PREV. buttons.
Q: What are the different LED indicators?
A: Red LED glowing - Charging
   Red LED OFF - Full Charge
   "BLUE" text blinks - BT Discover Mode.
   "BLUE" text stays constant - Speaker is connected to a device

Q: What is the operating range of the ZEB-THUMP in BT mode?
A: 8-10 meters (without any obstacles).
Q: How to decrease/increase the volume level?
A: Press and hold the Prev. / Next button to Decrease / Increase the volume level respectively. The volume can also be controlled using the volume adjustment knob.

Q: What is the maximum capacity of USB / SD card that ZEB-THUMP can support?
A: 32GB.
Q: Does the speaker have built-in mic for call function ?
A: No.
Q: How to control the Mic Volume of the speaker?
A: The mic volume can be controlled by rotating the "MIC VOL" knob on the speaker once a Mic is connected.
Q: What is the charging voltage?
A: DC 5V with micro USB cable.
Q: How to use USB / SD card?
A: Once the USB / SD card is inserted into the respective slot, it will detect the USB / SD card and automatically start playing the songs from it.