Q: How to connect with ZEB-THUMP 100 through wireless BT mode?
A: .Power ON the speaker, as it enters BT mode by default. Scan for nearby devices on the phone's BT menu. Click on the ZEB-THUMP 100 name and pair with it.

Q What are the different modes in the speaker?
A: .BT Wireless / SD card / USB / FM Mode / AUX. 
Q: How to tune FM channels?
A: .Switch the speaker to FM mode.
    Press the Play / Pause button once to scan the FM channels.
    Once the scanning is done, the speaker will start playing from first saved channel.
    To change the channels, use the NEXT / PREV buttons.
Q What are the different LED indicators?
A: .“RED” LED glowing - Charging
     “RED” LED OFF - Full Charge
     “BLUE” LED blinks - BT Discover Mode.
     “BLUE” LED stays constant - Speaker is connected to a device 
Q: What is the operating range of the ZEB-THUMP 100 in BT mode?
A: 8-10 meters (without any obstacles). 
Q:How to decrease/increase the volume level?
A: Press and hold the Prev. / Next button to Decrease / Increase the volume level respectively. The volume can also be controlled using the volume adjustment knob.

Q: What is the maximum capacity of USB / SD card that ZEB-THUMP 100 can support?
A: 32GB
Q: Does the speaker have built-in mic for call function?
A: No.
Q: How to use USB / micro SD card?
A: Once the USB / micro SD card is inserted into the respective slot, it will detect the USB / micro SD card and automatically start playing the songs from it. 
Q: How to control the Mic Volume of the speaker?
A: The mic volume can be controlled by rotating the "MIC VOL" knob on the speaker once a Mic is connected. 
Q: How to use the TWS function?
A: TWS function requires 2 nos. of ZEB-THUMP 100 speakers.
     After entering wireless BT mode on both the speakers, long press the “TWS” button on any one of the speakers.
     You would hear a distinct tune indicating that both the speakers are paired together with “TWS” indication.
     Open the mobile's BT menu and scan for ZEB-THUMP 100 to pair with it.
Q: What is the charging voltage?
A: Connect 5V DC input cable to the speaker and connect the other end of the cable to a 5V DC adapter.