Q: How to connect ZEB-THUMP 650 through wireless BT mode?
A: Power ON the speaker, it enters BT mode by default. Scan for nearby devices on the phone's BT menu. Click on the ZEB-THUMP 650 name to pair with it.
Q: What are the different modes in the speaker?
A.  BT Wireless / SD card / USB / FM Mode / AUX / MIC in.
Q: What is the operating range of ZEB-THUMP 650 in BT mode?
A: ..8-10 meters.
Q: What is the maximum capacity of a USB / micro SD card that ZEB-THUMP 650 can support?
A: .32GB
Q:How to use a USB / micro SD card?
A:  Once the USB / micro SD card is inserted into the respective slot, the speaker will detect the USB / micro SD card automatically and start playing the songs from it.

Q: How to tune FM channels?
A: .Switch the speaker to FM mode by pressing the Mode button.
Long press the Play / Pause button to scan the FM channels.
Once the scanning is done, the speaker will start playing from the first saved channel.
To change the channels, use the NEXT / PREV buttons.
Q: What are the different LED indicators?
A: The RED LED starts to flash when it is in low battery.
Once it is fully charged the RED LED glows contstant.

Q: How to decrease/increase the volume level?
A: Rotate the volume knobs to Decrease / Increase the volume level respectively.
Q: How to use the TWS function?
A: . TWS function requires 2 nos. of ZEB-THUMP 650 speakers.
After entering wireless BT mode on both the speakers, long press the “Plat/Pause TWS” button on any one of the speakers.
You would hear a distinct tune indicating that both the speakers are paired together with TWS notification.
Open the mobile's BT menu and scan for ZEB-THUMP 650 to pair with it.
Q: How to use MIC in ZEB-THUMP 650?
A: . ZEB-THUMP 650 comes with a wireless mic. Please make sure that you turn ON the MIC with two AA sized batteries for power. After turning ON the mic, the speaker automatically connects with the MIC.
Q: How to record using ZEB-THUMP 650?
A: .Turn ON the provided Wireless MIC with two AA sized batteries.
Insert the mSD / USB for storage purposes of the recordings
Switch to mSD/USB mode by pressing the mode button.
Long press the dedicated REC button present in the speaker to initiate recording.
After recording is done, press the REC button once to stop.
The recording will be saved as the last song of the USB / microSD card.
Q: How to use a wired mic?
A: Connect the wired mic in the provided 6.3mm audio jack of the speaker. Now, you are all set to use wired mic.