FAQ - ZEB-THUMP 800

Q: How to connect ZEB-THUMP 800 through wireless BT mode?
A: Power ON the speaker,  it enters BT mode by default. Scan for nearby devices on the phone's BT menu. Click on the ZEB-THUMP 800 name to pair with it.
Q: What are the different modes  in the speaker?
A.  BT Wireless / SD card / USB / FM Mode / AUX / Wireless MIC
Q: What is the operating range of ZEB-THUMP 800 in BT mode?
A: .8-10 meters.
Q:  What is the maximum capacity of a USB / micro SD card that ZEB-THUMP 800 can support?
A: .32GB
Q: How to use a USB / micro SD card?
A:  Once the USB / micro SD card is inserted into the respective slot, the speaker will detect the USB / micro SD card automatically and start playing the songs from it. 
Q: What are the button functions available in ZEB-BUDDY 500?
A: .Turn the speaker ON/OFF using the power switch.
Press the MODE button to change it to BT / USB / mSD / AUX / FM mode.
Press    to Play/Pause.
Press    /    buttons for play Next or Previous tracks
Rotate the Speaker volume / MIC volume knobs for volume control.
Press & hold  MODE  button to turn ON TWS function.
Press the EQ button to switch between different preset equalizer modes.
Press dedicated   /   buttons to control Treble, Bass, Guitar and MIC echo.
Long press REC button for 2-3 sec to initiate recording in either USB or microSD mode.
Press  to change the RGB patterns.
Q: How to tune FM channels?
A: Switch the speaker to FM mode by pressing the Mode button.
Press the Play / Pause button once to scan the FM channels.
Once the scanning is done, the speaker will start playing from the first saved channel.
To change the channels, use the NEXT / PREV buttons.
For better FM reception, use the provided AUX cable as antenna.
Q: What are the different LED indicators?
A: Red LED glows when the speaker is being charged.
The LED turns OFF when the speaker gets fully charged.
Q: How to decrease/increase the volume level?
A: . Rotate the volume knobs to Decrease / Increase the volume level respectively.
Q: How to use the TWS function?
A: . TWS function requires 2 nos. of ZEB-THUMP 800 speakers.
After entering wireless BT mode on both the speakers, long press the “MODE” button on any one of the speakers.
You would hear a distinct tune indicating that both the speakers are paired together with TWS notification.
Open the mobile's BT menu and scan for ZEB-THUMP 800 to pair with it.
Q: How to use MIC in ZEB-THUMP 800?
A: .ZEB-THUMP 800 comes with a wireless mic. Please make sure that you turn ON the MIC with two AA sized batteries for power. After turning ON the mic, the speaker automatically connects with the MIC.
Q: How to use different equalizer modes in ZEB-THUMP 800?
A: A dedicated EQ button is present in ZEB-THUMP 800 to use the multiple preset equalizer modes
Q: How to record using ZEB-THUMP 800?
A: Turn ON the provided Wireless MIC with two AA sized batteries.
Insert the mSD / USB for storage purposes of the recordings.
     Switch to mSD/USB mode by pressing the mode button.
Long press the dedicated REC button present in the speaker to initiate recording.
After recording is done, press the REC button once to stop.
The recording will be saved as the last song of the USB / microSD card.
Q: What is the charging voltage of ZEB-THUMP 800?
A: Connect 5V DC input cable to the speaker and connect the other end of the cable to a 5V DC adapter
Q: How to use a wired mic?
A: Connect the wired mic in the provided 6.3mm audio jack of the speaker.
Now, you are all set to use wired mic.