Q: How to connect the ZEB-TRANSFORMER K4 keyboard?
A: ZEB-TRANSFORMER K4 is a plug and play USB interface keyboard, which can be connected to your Laptop/Desktop’s USB port for direct usage.
Q: How to use the knob?
A: The keyboard had 2 modes of control with the rotary knob, one is for LED backlight and the other is for volume control. To toggle between these modes of control, short press the FN key and Knob together.
Once the knob is set in volume control mode, you can mute the volume by pressing the knob and adjust the volume by rotating the knob.
While the knob is set in LED backlight mode, you can change the LED mode by pressing the knob. You can adjust the brightness or LED movement speed by rotating the knob.
Q: What are the control methods for the LED modes?
A: In ZEB-TRANSFORMER K4 the LED modes can be controlled by two methods
Set the knob control in LED backlight mode, then you can change the LED mode by pressing the knob. Brightness or LED movement speed can be adjusted by rotating the knob.
Additionally, you can press the FN key and any of the 1-9 number keys to change the LED modes.
FN key and Number 5 key (pressed together) consist of 8 LED modes, which can be changed by repeated press.
LED custom mode can be used with the FN key and Number 7 key pressed twice. It can be identified with the RGB LED glowing on the leftmost zone of the keyboard. Press FN key and Up/Down arrow to change the preferred colors and Right / Left to change the zone in which color has to be changed.
Q How to adjust the LED brightness?
A: FN key and PG UP / PG DN keys to increase / decrease the LED brightness respectively.
When the knob is set at LED backlight mode, you can adjust the brightness by rotating the knob.(Applies only for static LED modes)