FAQ - ZEB - JUKE BAR 9400 PRO DOLBY 5.1


Q: How to access the various modes of the ZEB - JUKE BAR 9400 PRO DOLBY 5.1 soundbar?
A: The INPUT button, provided on the remote or on the soundbar can be pressed to change between various modes of connectivity.
Q: How to connect the soundbar's HDMI ARC with the TV?
A: Kindly make sure that the TV which is used, supports HDMI ARC for audio.
Connect an HDMI ARC supported cable (version 1.4 or above with a minimum data transfer rate of 10.2Gbps) to the HDMI ARC port of the TV and the other end to the HDMI ARC port of the soundbar.
Enter the HDMI(ARC) input mode using the input button.
Enable the External Audio or Speaker settings of your TV (only if required).
Q: How to connect with ZEB - JUKE BAR 9400 PRO DOLBY 5.1 for wireless music?
A: Power ON the soundbar and enter into BT mode using the input button.
Scan for nearby BT devices on your device's BT menu and tap the name 'ZEB - JUKE BAR 9400 PRO DOLBY 5.1' to connect.
Q: How to use OPTICAL input to connect with TV?
A: Kindly make sure that the TV which is used, supports OPTICAL output for audio.
Connect an OPTICAL cable to the OPTICAL output port of the TV and the other end to the OPTICAL input of the soundbar.
Enter the OPTICAL input mode using the input button.
Enable the External Audio or Speaker settings of your TV (only if required).
Q: How to use AUX input to connect with TV?
A: Kindly make sure that your TV supports audio output via 3.5mm audio jack to use AUX input mode. If your TV supports 3.5mm AUX audio output, use a 3.5mm AUX to RCA audio cable accordingly. Please refer image below:
 3.5mm AUX cable
Enter the AUX mode and enable the External Audio or Speaker settings of your TV (only if required).
 
Q: How to ensure if the soundbar and subwoofer are set up for proper 5.1 surround experience?
A: .For best experience kindly use the HDMI ARC or OPTICAL ports for connectivity.
Please ensure your TV supports 5.1 surround audio through it’s HDMI ARC or OPTICAL ports.
You can download or use any 5.1 surround video file from online and play it, while the soundbar speaker is connected with theTV either via the HDMI ARC or OPTICAL connectivity.
This can help you to verify with the surround speaker set up.
Q: How to identify if the speaker is playing a proper DOLBY audio?
A: The ZEB - JUKE BAR 9400 PRO DOLBY 5.1 will display the word DOLBY AUDIO at the beginning, while playing such a file.
Q: Is it necessary to adjust settings in the TV to get the best experience out of the soundbar?
A: Yes, after connecting the HDMI ARC and the OPTICAL port, kindly make sure that the TV’s audio settings / speaker settings are adjusted accordingly to get the best audio experience. Kindly approach the TV manufacturer for knowing the settings or procedure.
Q: How to adjust the soundbar’s audio output with the remote?
A: Please use the TR +/- and SW +/- options in the remote to adjust the Treble and Bass frequencies respectively. The CEN +/- and SURR +/- can be used to adjust center and surround speaker output. Try adjusting these levels as per your requirement.
In addition, the remote also provides preset equaliser options such as MUSIC / NEWS / MOVIE / SPORT modes.