ZEB - JUKE BAR 9700 PRO DOLBY ATMOS:

FAQ

Q: How to access the various modes of the ZEB - JUKE BAR 9700 PRO DOLBY ATMOS soundbar?
A: The INPUT button, provided on the remote or on the soundbar can be pressed to change the mode of connectivity.
Q: How to connect the soundbar's HDMI ARC with the TV?
A: Kindly make sure that the TV which is used, supports HDMI ARC for audio.
Connect an HDMI ARC supported cable (version 1.4 or above with a minimum data transfer rate of 10.2Gbps) to the HDMI ARC port of the TV and the other end to the HDMI ARC port of the soundbar.
Enter the HDMI (ARC) input mode using the input button.
Enable the External Audio or Speaker settings of your TV (only if required).
Q: How to use the HDMI passthrough feature in ZEB - JUKE BAR 9700 PRO DOLBY ATMOS  soundbar?
A: The soundbar provides 2 x HDMI IN ports and an HDMI ARC port for passthrough connectivity.
Firstly, any AV source with HDMI connectivity can be connected to the HDMI 1 or HDMI 2 INPUT ports of the soundbar.
Further, the TV HDMI (ARC / normal) port must be connected to the HDMI ARC port of the soundbar.
Please ensure that both these connections must be done using HDMI cable with version 2.0 (with data transfer support of 18Gbps and ARC support) at either end.
The soundbar must be set in the HDMI 1 or HDMI 2 input mode accordingly, after the cables are connected.
Q: How to connect with ZEB - JUKE BAR 9700 PRO DOLBY ATMOS  for wireless music?
A: Power ON the soundbar and enter into BT mode using the input button.
Scan for nearby BT devices on your device's BT menu and tap the name 'ZEB - JUKE BAR 9700 PRO DOLBY ATMOS ' to connect.
Q: How to use OPTICAL input to connect with TV?
A: Kindly make sure that the TV which is used, supports OPTICAL output for audio.
Connect an OPTICAL cable to the OPTICAL output port of the TV and the other end to the OPTICAL input of the soundbar.
Enter the OPTICAL input mode using the input button.
Enable the External Audio or Speaker settings of your TV (only if required).
Q: How to use AUX input to connect with TV?
A: .Kindly make sure that your TV supports audio output (via RCA or headphone output port)* to use AUX input mode.

*If your TV supports RCA stereo audio output, use an RCA stereo to 3.5mm AUX cable to connect with the soundbar. Please refer image below:
 3.5mm AUX cable
*If your TV supports 3.5mm AUX audio output, use a 3.5mm AUX to 3.5mm AUX audio cable accordingly. Please refer image below:
Audio cable
Enter the AUX mode and enable the External Audio or Speaker settings of your TV (only if required).

Q: How to identify if the speaker is playing a DOLBY audio?
A: The ZEB - JUKE BAR 9700 PRO DOLBY ATMOS displays the word DOLBY ATMOS / DOLBY SURROUND at the beginning, while playing such a file.
Q: Is it necessary to adjust settings in the TV to get the best experience out of the soundbar?
A: Yes, after connecting the HDMI ARC and the OPTICAL port, kindly make sure that the TV’s audio settings / speaker settings are adjusted accordingly to get the best audio experience. Kindly approach the TV manufacturer for further assistance on the same.
Q: How to adjust the soundbar’s audio output with the remote?
A: Please use the TREB +/- and BASS +/- options in the remote to adjust the Treble and Bass frequencies respectively.
Try adjusting the levels as per your requirement.
In addition, the remote also provides preset equaliser options such as MUSIC / NEWS / MOVIE / 3D modes.
BACK TO TOP