Zeb Masterpiece

FAQ

Q: How to Power ON/OFF ZEB-MASTERPIECE?

A: Long press the "POWER" button to power ON/OFF the speaker

Q: What are the different modes in ZEB-MASTERPIECE speaker and how to change them?

A: Single press the mode("M") button to toggle between different modes as given below,
BT Wireless / Micro SD / USB / FM Mode / AUX.

Q: How to connect ZEB-MASTERPIECE for a wireless music experience?

A: When ZEB-MASTERPIECE is in BT mode, search for nearby BT devices in your mobile. Tap the name "ZEB-MASTERPIECE" and connect to it.
(Password - 0000, if prompted)

Q: How to use TWS mode with ZEB-MASTERPIECE?

A: TWS mode requires 2 nos. of ZEB-MASTERPIECE speakers. While the speakers are ON, long press the mode("M") button on either of the speakers, till you hear a tone indicating that the TWS mode is activated.
Now the speakers will automatically get paired with each other. Scan for "ZEB-MASTERPIECE" on your device's BT menu and connect to it.
The songs played hereafter, will be played on both the speakers in a stereo setup.

Q: Does ZEB-MASTERPIECE support call function and how to use it?

A: Yes, while your device is connected to the speaker through BT,
    Single press Play/Pause button   - Answer incoming call/Hang-up on a call.
    Long press Play/Pause button   - Reject incoming call.
    Double press Play/Pause button   - Re-dial previous number.

Q: How to use Pendrive(USB)/microSD card?

A: Once the Pendrive(USB)/microSD card is inserted in the speaker, it automatically enters the USB/microSD mode.

Q: What is the maximum storage size of the USB/microSD card supported by ZEB-MASTERPIECE?

A: 32GB.

Q: How to tune FM channels?

A: Switch the speaker to FM mode.
    Connect the AUX cable to the AUX port of the speaker and leave the other end free (this cable will act as the FM antenna).
    Long press the Play/Pause button once to scan the FM channels.
    Once the scanning is done, the speaker will start playing from first scanned channel.
    To change the channels you can use +/- buttons.

Q: What are the different LED indicators(at the back panel)?

A: Red LED glowing        - Charging.
    Red LED turns OFF        - Fully charged.
    Blue LED blinks        - Discover Mode.
    Blue LED glows        - Speaker is connected to a device.

Q: How to control media in ZEB-MASTERPIECE?

A: Single press "Play/Pause" button   - Play/Pause.
    Single press "+" button       - Next track.
    Single press "-" button       - Prev. track.

Q: How to control volume in ZEB-MASTERPIECE?

A: Long press "+" button - Increase volume.
Long press "-" button - Decrease volume.

Q: What is the operating range of the ZEB-MASTERPIECE in wireless mode?

A: 8-10 meters.

Q: What is the charging voltage OF ZEB-MASTERPIECE ?

A: DC 5V with micro USB cable.

SHOPPING CART

title